| Sl.# | Antenna Model # | Frequency Band | Antenna Gain | Antenna Bandwidth | VSWR | Radiation Pattern | Antenna Polarization | Horizontal Beamwidth | Vertical Beamwidth | Antenna Impedance | Antenna Termination |
| 1. | CY-150 | 134-174MHz. | 11dBi | 5 MHz | 1.5:1 | Directional | RHCP or LHCP | 65 Degrees | 55 Degrees | 50 Ohms | N-Female |
| 2. | CY-250 | 220-290MHz. | 11dBi | 8 MHz | 1.5:1 | Directional | RHCP or LHCP | 65 Degrees | 55 Degrees | 50 Ohms | N-Female |
| 3. | CY-350 | 300-400MHz. | 11dBi | 10 MHz | 1.5:1 | Directional | RHCP or LHCP | 65 Degrees | 55 Degrees | 50 Ohms | N-Female |
| 3. | CY-450 | 400-512MHz. | 11dBi | 20 MHz | 1.5:1 | Directional | RHCP or LHCP | 65 Degrees | 55 Degrees | 50 Ohms | N-Female |
Antenna Experts manufacturer & exporter of satellite tracking antenna systems for telemetry, tracking and command center circular polarized yagi antenna for 134-174MHz, 220-290MHz, 300-400MHz and 406-512MHz frequency bands. Our VHF circular polarized telemetry, tracking and command center yagi antenna and UHF circular polarized yagi antenna design reflects innovative modern antenna construction. The mounting hardware of VHF UHF circular polarized telemetry, tracking and command center yagi antenna is made of type 316 marine grade stainless steel. Antenna Experts also manufactures circular polarized yagi with customized frequency band.
Antenna Experts circular polarized telemetry, tracking and command center CY series VHF/UHF rugged, all weather Crossed Elements, satellite tracking antenna circular polarized yagi antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of gravity of the circular polarized yagi antenna for mounting on a round pipe supplied with the circular yagi antenna. The Circular Yagi antenna can be configured to work as RHCP or LHCP field selectable by inter-changing the 90 Degrees delay harness cable.
Antenna Experts satellite tracking antenna circular polarized yagi antenna uses a GAMMA matching feed, eliminating the use of folded dipole. The telemetry, tracking and command circular polarized yagi antenna termination uses N-Female connector fixed on the antenna dipole. These telemetry, tracking and command Circular Yagi Antenna are highly directional, comes factory tuned and does not require any field adjustment. The feed point radiator of circular yagi antenna is enclosed in a Nylon housing designed to protect against severe environmental conditions and minimize pattern distortion.
VHF UHF satellite tracking antenna CY series circular polarized yagi antenna is rugged, all weather crossed elements yagi antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy, is designed for circular polarization. The complete circular polarization telemetry, tracking and command yagi antenna is supplied with powder coating finish to protect the antenna further from severe environmental condition. The mounting hardware and all fasteners of circular polarized yagi antenna are made of type 316 marine grade stainless steel.
The phase shifter cable and harness cable comes with impedance matched moulded joints for low VSWR and protection against weather. When the satellite tracking antenna antenna is mounted on the rotator, the crossed elements array makes an angle of 45 degrees with respect to horizontal plane. A crossed member will be supplied with the antenna for necessary mounting arrangement on a Rotator.
CY series satellite tracking circular polarized yagi antenna is supplied with N termination fixed on the driven element. This directional circular polarized yagi antenna, comes factory tuned and does not require any field adjustment. The circular polarized yagi antenna is highly suitable as base station antennas for satellite tracking and telemetry application sites where longer satellite communication range is required.
Radiating elements, supporting booms and adjoining metal castings of satellite tracking circular polarized yagi antenna have been constructed in 6063T6 ultra corrosion resistant architectural anodized aluminium alloys to prevent corrosion. Our VHF UHF circular polarized aagi antenna is supplied with powder coating finish to protect the yagi antenna further from severe environmental conditions.
The VHF Circular Polarized telemetry, tracking and command center yagi antennas when packed, comes with elements removed from the antenna boom for ease of packing and transportation where as the UHF Yagi Antennas comes in pre-assembled design with permanently fixed elements in to the support boom. The satellite tracking antenna is supplied with olive green MIL color finish. Other customized housing/radome color can also be supplied on request.
| Sl.# | Antenna Model # | Frequency Band | Antenna Gain | Antenna Bandwidth | VSWR | Radiation Pattern | Antenna Polarization | Antenna Impedance | Antenna Termination |
| 1. | CY-150Q | 134-174MHz. | 16dBi | 5 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 2. | CY-250Q | 220-290MHz. | 16dBi | 8 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 3. | CY-350Q | 300-400MHz. | 16dBi | 10 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 3. | CY-450Q | 400-512MHz. | 16dBi | 20 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
Antenna Experts manufacturer & exporter of MIL grade dual stacked satellite tracking antenna systems for telemetry, tracking and command center circular polarized dual yagi antenna for 134-174MHz, 220-290MHz, 300-400MHz and 406-512MHz frequency bands. Our VHF circular polarized telemetry, tracking and command center yagi antenna and UHF circular polarized yagi antenna design reflects innovative modern antenna construction. The mounting hardware of VHF UHF circular polarized telemetry, tracking and command center yagi antenna is made of type 316 marine grade stainless steel. Antenna Experts also manufactures circular polarized yagi with customized frequency band.
Antenna Experts circular polarized telemetry, tracking and command center CY series VHF/UHF rugged, all weather Crossed Elements, satellite tracking antenna circular polarized dual stacked yagi antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of gravity of the circular polarized yagi antenna for mounting on a round pipe supplied with the circular yagi antenna. The Circular Yagi antenna can be configured to work as RHCP or LHCP field selectable by inter-changing the 90 Degrees delay harness cable.
Antenna Experts satellite tracking antenna circular polarized dual stacked yagi antenna uses a GAMMA matching feed, eliminating the use of folded dipole. The telemetry, tracking and command circular polarized yagi antenna termination uses N-Female connector fixed on the antenna dipole. These telemetry, tracking and command Circular Dual Yagi Antenna are highly directional, comes factory tuned and does not require any field adjustment. The feed point radiator of circular yagi antenna is enclosed in a Nylon housing designed to protect against severe environmental conditions and minimize pattern distortion.
VHF UHF satellite tracking antenna CY series circular polarized dual stacked yagi antenna is rugged, all weather crossed elements yagi antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy, is designed for circular polarization. The complete circular polarization telemetry, tracking and command yagi antenna is supplied with powder coating finish to protect the antenna further from severe environmental condition. The mounting hardware and all fasteners of circular polarized dual stacked yagi antenna are made of type 316 marine grade stainless steel.
The phase shifter cable and harness cable comes with impedance matched moulded joints for low VSWR and protection against weather. When the satellite tracking antenna antenna is mounted on the rotator, the crossed elements array makes an angle of 45 degrees with respect to horizontal plane. A crossed member will be supplied with the antenna for necessary mounting arrangement on a Rotator.
CY series dual stacked satellite tracking circular polarized yagi antenna is supplied with N termination fixed on the driven element. This directional circular polarized yagi antenna, comes factory tuned and does not require any field adjustment. The circular polarized yagi antenna is highly suitable as base station antennas for satellite tracking and telemetry application sites where longer satellite communication range is required.
Radiating elements, supporting booms and adjoining metal castings of satellite tracking circular polarized yagi antenna have been constructed in 6063T6 ultra corrosion resistant architectural anodized aluminium alloys to prevent corrosion. Our VHF UHF circular polarized aagi antenna is supplied with powder coating finish to protect the yagi antenna further from severe environmental conditions.
The VHF Circular Polarized telemetry, tracking and command center dual stacked yagi antennas when packed, comes with elements removed from the antenna boom for ease of packing and transportation where as the UHF Yagi Antennas comes in pre-assembled design with permanently fixed elements in to the support boom. The satellite tracking antenna is supplied with olive green MIL color finish. Other customized housing/radome color can also be supplied on request.
| Sl.# | Antenna Model # | Frequency Band | Antenna Gain | Antenna Bandwidth | VSWR | Radiation Pattern | Antenna Polarization | Antenna Impedance | Antenna Termination |
| 1. | CY-150Q | 134-174MHz. | 16dBi | 5 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 2. | CY-250Q | 220-290MHz. | 16dBi | 8 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 3. | CY-350Q | 300-400MHz. | 16dBi | 10 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
| 3. | CY-450Q | 400-512MHz. | 16dBi | 20 MHz | 1.5:1 | Directional | RHCP or LHCP | 50 Ohms | N-Female |
Antenna Experts manufacturer & exporter of high gain quad stacked VHF UHF satellite tracking antenna systems for telemetry, tracking and command center circular polarized dual yagi antenna for 134-174MHz, 220-290MHz, 300-400MHz and 406-512MHz frequency bands. Our VHF circular polarized telemetry, tracking and command center yagi antenna and UHF circular polarized quad stacked yagi antenna design reflects innovative modern antenna construction. The mounting hardware of VHF UHF circular polarized telemetry, tracking and command center yagi antenna is made of type 316 marine grade stainless steel. Antenna Experts also manufactures circular polarized yagi with customized frequency band.
Antenna Experts circular polarized telemetry, tracking and command center CY series VHF/UHF rugged, all weather Crossed Elements, satellite tracking antenna circular polarized quad stacked yagi antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of gravity of the circular polarized quad yagi antenna for mounting on a round pipe supplied with the circular quad stacked yagi antenna. The Circular Quad Yagi antenna can be configured to work as RHCP or LHCP field selectable by inter-changing the 90 Degrees delay harness cable.
Antenna Experts VHF UHF satellite tracking antenna circular polarized quad stacked yagi antenna uses a GAMMA matching feed, eliminating the use of folded dipole. The telemetry, tracking and command circular polarized quad yagi antenna termination uses N-Female connector fixed on the antenna dipole. These telemetry, tracking and command Circular Dual Yagi Antenna are highly directional, comes factory tuned and does not require any field adjustment. The feed point radiator of circular yagi antenna is enclosed in a Nylon housing designed to protect against severe environmental conditions and minimize pattern distortion.
VHF UHF military grade satellite tracking antenna CY series circular polarized quad stacked yagi antenna is rugged, all weather crossed elements yagi antenna use 6063T6 ultra corrosion resistant architectural anodized aluminum alloy, is designed for circular polarization. The complete circular polarization telemetry, tracking and command yagi antenna is supplied with powder coating finish to protect the antenna further from severe environmental condition. The mounting hardware and all fasteners of circular polarized dual stacked yagi antenna are made of type 316 marine grade stainless steel.
The phase shifter cable and harness cable comes with impedance matched moulded joints for low VSWR and protection against weather. When the satellite tracking antenna antenna is mounted on the rotator, the crossed elements array makes an angle of 45 degrees with respect to horizontal plane. A crossed member will be supplied with the antenna for necessary mounting arrangement on a Rotator.
CY series quad stacked satellite tracking circular polarized yagi antenna is supplied with N termination fixed on the driven element. This directional circular polarized yagi antenna, comes factory tuned and does not require any field adjustment. The circular polarized yagi antenna is highly suitable as base station antennas for satellite tracking and telemetry application sites where longer satellite communication range is required.
Radiating elements, supporting booms and adjoining metal castings of satellite tracking circular polarized quad stacked yagi antenna have been constructed in 6063T6 ultra corrosion resistant architectural anodized aluminium alloys to prevent corrosion. Our VHF UHF circular polarized yagi antenna is supplied with powder coating finish to protect the yagi antenna further from severe environmental conditions.
The VHF Circular Polarized telemetry, tracking and command center quad stacked yagi antennas when packed, comes with elements removed from the antenna boom for ease of packing and transportation where as the UHF Yagi Antennas comes in pre-assembled design with permanently fixed elements in to the support boom. The satellite tracking antenna is supplied with olive green MIL color finish. Other customized housing/radome color can also be supplied on request.